Octoplus / Octopus Box LG Software v.2.2.0 is out!

26.02.16

Octoplus / Octopus Box LG Software v.2.2.0 is out!

We have added world's first support for removal of McAfee's Kill Switch, LG Zero, K10!

Octoplus / Octopus Box LG Software v.2.2.0 Release Notes:

  • Added world's first Deactivate (McAfee) Kill Switch operation for the following models:
    • D850, D850PR,
    • D855, D855AR, D855K, D855P, D855TR, D855V.
  • Added support for the following models:
    • H650 - added world's first Direct Unlock, Repair IMEI, Repair BT Address, Repair Wi-Fi Address, Read/Write/Repair NVM, Read/Write QCN, Read/Reset Security, Write Security Backup, Read Full Flash (Dump NAND), Reset FRP/Screen Lock (thanks to mr. beto251172).
    • K420N - added Direct Unlock, Repair IMEI, Repair BT Address, Repair Wi-Fi Address, Read/Write/Repair NVM, Read/Write QCN, Read/Reset Security, Write Security Backup, Read Full Flash (Dump NAND).
  • Improved root operation for the following models:
    • D820, D820BK, D821,
    • H790, H790T, H791, H791F.

In order to perform Deactivate Kill Switch operation, please follow the next steps:

  1. Attach a testpoint as shown on figure in the manual and connect your phone using Micro USB cable (do NOT use any USB hubs!). For some firmware versions perform the following steps to put a phone into Qualcomm-Mode : press and hold Vol+ button, connect a phone directly to PC via Micro USB cable.
  2. Check PC Device Manager, a new device should appear Qualcomm HS-USB QDLoader 9008 or Unknown Device if you hadn't installed the driver yet. Drivers are available in Installation Folder.
  3. Release testpoint and press Deactivate Kill Switch button.
  4. Follow Software instructions (prompts).

 

  • All supported operations are described in details in the manual ("Cable & Manual" button in software).

 

 

 

Download Octoplus / Octopus Box LG Software v.2.2.0