Octoplus / Octopus Box LG Software v.2.2.3 is out!

18.03.16

Octoplus / Octopus Box LG Software v.2.2.3 is out!

We have added world's first support for different models of LG K4 and support for other phones!

Octoplus / Octopus Box LG Software v.2.2.3 Release Notes:

  • Added support for the following models:
    • K120AR - added world's first Direct Unlock, Read Codes, Repair IMEI, Read/Write/Repair EEPROM, Read Full Flash, Repair BT Address, Repair Wi-Fi MAC Address, Read phone's Info
    • K120E - added world's first Direct Unlock, Read Codes, Repair IMEI, Read/Write/Repair EEPROM, Read Full Flash, Repair BT Address, Repair Wi-Fi MAC Address, Read phone's Info
    • K120F - added world's first Direct Unlock, Read Codes, Repair IMEI, Read/Write/Repair EEPROM, Read Full Flash, Repair BT Address, Repair Wi-Fi MAC Address, Read phone's Info
    • K120GT - added world's first Direct Unlock, Read Codes, Repair IMEI, Read/Write/Repair EEPROM, Read Full Flash, Repair BT Address, Repair Wi-Fi MAC Address, Read phone's Info
    • K120H - added world's first Direct Unlock, Read Codes, Repair IMEI, Read/Write/Repair EEPROM, Read Full Flash, Repair BT Address, Repair Wi-Fi MAC Address, Read phone's Info
    • K130 - added world's first Direct Unlock, Read Codes, Repair IMEI (A/B), Read/Write EEPROM, Read Full Flash, Repair BT Address, Repair Wi-Fi MAC Address, Read phone's Info
    • K130E - added world's first Direct Unlock, Read Codes, Repair IMEI (A/B), Read/Write EEPROM, Read Full Flash, Repair BT Address, Repair Wi-Fi MAC Address, Read phone's Info
  • Added Reset Security operation for the following models:
    • D320, D320AG, D320AR, D320F, D320F8, D320G8, D320J8, D320N, D320TR
  • Added Deactivate (McAfee) Kill Switch * operation for the following models:
    • LS990
    • VS985, VS985DU, VS985WDU
  • All supported operations described in details in the manual ("Cable & Manual" button in software).

* In order to perform "Deactivate Kill Switch" operation, you need to do the following:

  1. Attach testpoint as shown on figure in manual, and connect phone with Micro USB cable (don't use USB hubs!).
    For some firmware versions, to put the phone into "Qualcomm-Mode", you can try to do the next: press and hold "Vol+" button and connect the phone directly to PC via micro USB cable
  2. Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008" or "Unknown Device" if you hadn't installed a driver. Drivers are available in Installation Folder
  3. Release testpoint and press "Deactivate Kill Switch" button
  4. Follow Software instructions (prompts)

Download Octoplus / Octopus Box LG Software v.2.2.3