Octoplus Box JTAG Software v.1.8.2 is out!

13.02.15

Octoplus Box JTAG Software v.1.8.2 is out!

We have added boot repair via USB and small TP for LG E960, F200K, F200L, F200S, F200LS
and via JTAG for Samsung GT-B5512 and LG F200L.

Octoplus Box JTAG Software v.1.8.2 Release Notes:

  • Added support for the following models:
    • LG E960 - added Dead Boot / Device Repair via USB
    • LG F200K - added Dead Boot Repair via USB
    • LG F200L - added Dead Boot Repair via USB / JTAG
    • LG F200LS - added Dead Boot Repair via USB
    • LG F200S - added Dead Boot Repair via USB
    • Samsung GT-B5512 - added Dead Boot / Device Repair via JTAG
  • All pinouts and Repair procedures are described in the manual ("Help" button in Software).

To repair mentioned above devices via USB, please follow the next three next steps:

  1. Attach testpoint as shown on Figure 1 in the Software manual and connect your phone using Micro USB cable directly into the motherboard’s USB port (do NOT use any USB hubs!)
  2. Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008" or "Unknown Device" if you hadn’t installed the driver yet. Drivers are in {Installation_Folder}\Driver\QHSUSB
  3. Release testpoint and press “EasyRepair” button in the software (or “Connect” button, when in Advanced Mode)

 

 

 

Download Octoplus Box JTAG Software v.1.8.2