Octoplus / Octopus Box Samsung Software v.1.9.2 is out!

10.04.15

Octoplus / Octopus Box Samsung Software v.1.9.2 is out!

We have added support for Samsung SM-G7200, SM-G7202, SM-G720AX, SM-G720NO, SHV-E250S, SHV-E250K and more!

Octoplus / Octopus Box Samsung Software v.1.9.2 Release Notes:

  • Added support for the following models:
    • SC-01G - added Write Cert, Wipe Security, Write Firmware, Read/Write QCN, Read/Write NVM, Read/Write Security, Read/Write EFS, Reboot in Download/Recovery Mode
    • SM-G7200 - added Write Cert (for IMEI A/B), Wipe Security, Write Firmware, Read/Write QCN, Read/Write NVM, Read/Write Security, Read/Write EFS, Reboot in Download/Recovery Mode
    • SM-G7202 - added Write Cert (for IMEI A/B), Wipe Security, Write Firmware, Read/Write QCN, Read/Write NVM, Read/Write Security, Read/Write EFS, Reboot in Download/Recovery Mode
    • SM-G720AX - added Write Cert, Wipe Security, Write Firmware, Read/Write QCN, Read/Write NVM, Read/Write Security, Read/Write EFS, Reboot in Download/Recovery Mode
    • SM-G720NO - added Write Cert, Wipe Security, Write Firmware, Read/Write QCN, Read/Write NVM, Read/Write Security, Read/Write EFS, Reboot in Download/Recovery Mode
    • SHV-E250S - added Unlock, Write Firmware, Repair IMEI, Wipe Security, Read/Write QCN, Read/Write/Repair NVM, Read/Write Security, Read/Write EFS, Reboot in Download/Recovery Mode
    • SHV-E250K - added Unlock, Write Firmware, Repair IMEI, Wipe Security, Read/Write QCN, Read/Write/Repair NVM, Read/Write Security, Read/Write EFS, Reboot in Download/Recovery Mode
    • GT-N7105 - added Read/Write QCN
    • GT-N7105T - added Read/Write QCN
    • SM-G3815 - added Read/Write QCN
  • Added "Read Key ID" operation. This operation allows you to read out the Key ID and let you know the IMEI Certificate compatibility.
    For devices with the same Key IDs, you can use the same IMEI Certificates.
    To check IMEI Certificates compatibility, look here.
    To read out the Key ID, complete the following steps:
    1. Go to "Support & Options" tab in the Software
    2. Take out (remove from the phone) SIM and SD cards
    3. Power the phone on
    4. Connect the phone to the Box using Samsung Micro UART C3300k/C3303k cable
    5. Proper block battery's contact by using a tape (the same, as for "Write Cert" operation)
    6. Keep phone's LCD on and unlocked during the procedure (touch LCD must be ON during the reading process)
    7. Press "Read Key ID" button
  • As usual, next Gift for all our users! We have uploaded new certificate files into the Support area!
  • New QCN files have been uploaded as well!
  • All supported operations are described in details in Software manual ("Cable & Manual" button in Software)

 

Download Octoplus / Octopus Box Samsung Software v.1.9.2