Octoplus JTAG Software v.1.9.1 is out!

29.05.15

Octoplus JTAG Software v.1.9.1 is out!

We have added Boot Repair via USB and small TP for LG E970, LG H220 and via JTAG for Huawei G525-U00, HTC One M7 (PN07110)!

Octoplus Box JTAG Software v.1.9.1 Release Notes:

  • Added support for the following models:
    • LG E970 - added Dead Boot Repair via USB
    • LG H220 - added Dead Boot Repair via USB
    • Huawei G525-U00 - added Dead Boot / Device Repair via JTAG
    • HTC One M7 (PN07110) - added Dead Boot Repair via JTAG, Repair IMEI, Repair CID (thanks to Mr. mathew_di)
  • All pinouts and Repair procedures are described in the manual ("Help" button in Software).

To repair LG E970 and LG H220 via USB, please follow the next three next steps:

  1. Attach testpoint as shown on Figure 1 in the Software manual and connect your phone using Micro USB cable directly into the motherboard’s USB port (do NOT use any USB hubs!)
  2. Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008" or "Unknown Device" if you hadn’t installed the driver yet. Drivers are in {Installation_Folder}\Driver\QHSUSB
  3. Release testpoint and press “EasyRepair” button in the software (or “Connect” button, when in Advanced Mode)

 

 

 

Download Octoplus Box JTAG Software v.1.9.1