Octoplus Box JTAG Software v.1.8.1 is out!

06.02.15

Octoplus Box JTAG Software v.1.8.1 is out!

We have added boot repair via USB and small TP for LG F310L and LG L-04E.
Also added Boot/Device Repair for Samsung GT-I9210T and HTC Desire (PB99210) via JTAG.

Octoplus Box JTAG Software v.1.8.1 Release Notes:

  • Added support for the following models:
    • LG F310L - added Dead Boot Repair via USB
    • LG L-04E - added Dead Boot Repair via USB
    • Samsung GT-I9210T - added Dead Boot / Device Repair
    • HTC Desire (PB99210) - added Dead Boot / Device Repair, Repair IMEI, Repair CID, Unlock (via Read Codes) (thanks to mr. mathew_di)
  • Improved connect procedure for Dead Boot Repair via USB for the following devices:
    • LG P710
    • LG P712
    • LG P713, P713GO, P713TR
    • LG P714
    • LG P715
    • LG P716
  • All pinouts and Repair procedures are described in the manual ("Help" button in Software).

To repair F310L and LG L-04E via USB, please follow the next three steps:

  1. Attach testpoint as shown on Figure 1 in the Software manual and connect your phone using Micro USB cable directly into the motherboard’s USB port (do NOT use any USB hubs!)
  2. Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008" or "Unknown Device" if you hadn’t installed the driver yet. Drivers are in {Installation_Folder}\Driver\QHSUSB
  3. Release testpoint and press “EasyRepair” button in the software (or “Connect” button, when in Advanced Mode)

 

Download Octoplus Box JTAG Software v.1.8.1